background image

 

www.optoedu.com                                                                          Page 14 of 14                                                                    [email protected] 

 

Packing List of A41.1903 Operation Microscope 

 

A. Microscope Carton: 

1. Balance arm with binocular and magnification changer………………….1 set 
2. Beamsplitter (optional)…………………………………………………….…1 pc 
3. Video camera adapter (optional)…………….……………………..……….1 pc 
4. CCD cam

era (optional)………………….……………...……………………1 pc 

5. Demonstrator(optional)……………………………….…………..……….…1 pc 
6. Objectives 
F=200mm (fitted on the microscope)………….………………..…….………1 pc 
F=250mm ………………………………………….………………….….……..1 pc 
F=300mm (optional)…………………………………..………………….…….1 pc 
F=400m

m (optional)…………………………………………..………….…….1 pc 

7. Power supply box …………………………………………..………….……1 set 
8. Handle…………………………………………………………....……….…..1 set 
9. Handwheel…………………………………………………..……….……….2 pcs 
10. Power supply adapter…………………………………….………………..1 set 
11. Screwdriver………………………………………………….……………… 2 pcs 
12. Spare LED bulb………………………………………..….………………..1 pc 
13. User’s manual………………………………………..…….……………....1 copy 

B. Floor Stand Carton 

1. Base with wheels………………….………………..………….…………….1 set 
2. Column………………………………………………….……………………..2 pcs 
3. Threaded cover………………………………………………..……………..1 pc 

 
 
 
 

Summary of Contents for A41.1903















Reviews: