www.optoedu.com Page 3 of 14 [email protected]
The instrument is suitable for various diagnosis, examination and general microscope operation. Due to
its flexible and stable structure and easy operation, the instrument can be widely used for
micro-operation in dental especially, and also can be used for micros-operation in ophthalmology,
ear-nose-throat, gynecology and surgery.
The Environment For Use
a) Transport and Storing
● Ambient Temperature Range: -40
℃
-55
℃
● Relative Humidity Range: 10%-80%
● Barometric Pressure Range: 500 hPa-1060 hPa
b) Operation
● Ambient Temperature Range: 5
℃
-40
℃
● Relative Humidity Range: 30%-80%
● Barometric Pressure Range: 700 hPa-1060 hPa2
1. Precautions
1.1
After unpacking the carton, check the parts against the packing list first. If there is any
difference, contact the sales department to protect your benefit.
1.2
When carrying and unpacking the carton, pay attention that the arrow on the carton shall be at
upward position. Handle the instrument with care to prevent it from being damaged.
1.3
The instrument shall be used and kept in a clean and dry place with constant temperature in
order to ensure the lifetime of the component in the instrument. Before using the instrument,
make sure to step down the brake on the foot wheel to prevent the instrument from sliding to
avoid accident. When moving the instrument in the room, it is recommended to push it at the
lower part to prevent the instrument from being upset and damaged.
1.4
Do not touch the surface of the lens and prism with hand or hard objects.
1.5
When the LED bulb is broken and has to be replaced, make sure that the power is off and the
bulb is fully cool down in order to prevent your finger from being hurt. Never touch the glass
surface of the illumination bulb (LED bulb) with your finger directly. If the bulb surface is found
oily and dirty, it shall be cleaned with flannelette soaked with alcohol before usage.
1.6
The counterweight of the base of the instrument is limited. When the arm is stretched, never
press the instrument with strong force. Otherwise, the instrument can go down to get the
operator or the instrument itself damaged.
1.7
Before using the instrument, make sure the connecting parts are fastened or adjusted to right
position to avoid accident caused by the failure of the parts.
1.8
Never move any part of the instrument with strong force. Adjustment shall be done according
to the instruction, especially for the operation handle, it shall not be turned with over force to
prevent it from impacting the arm to get the components damaged.
1.9
Power shall be switched off after using the instrument. After use, the instrument shall be
cleaned and covered with plastic cover to prevent dust.
2. Main Technical Data
2.1 Input voltage: AC100-240V, frequency: 50HZ-60HZ
