www.cnoec.com.cn Page 7 of 17 [email protected]
4-7 Mount and Remove the Optional Eyepiece Micrometer
1) Turn and remove the mounting ring
②
from the eyepiece.(Fig.5)
2) Clean the eyepiece micrometer
①
and mount it to the mounting ring with the
inscription side downward.
3) Gently twist the mounting ring with the eyepiece micrometer into the eyepiece
till tightening
②
securely.
4) To remove the eyepiece micrometer, take down the mounting ring
③
by twisting
and take out of the micrometer, and then wrap it.
4-8 Install the illumination device
1)Insert the illumination device
①
in the bracket with the protrudent side toward
the lock-screw
②
and tighten the lock-screw. (Fig.6)
2) Put the plug into the socket of the pillar stand
③
.
4-9 Choose the optical system
1) You can alternate the binocular observation and video capture by pushing or
pulling the pole. You can attain binocular observation by pushing the pole inside,
or attain video capture by pulling it outside. No matter what optical system is
chosen, push or pull the pole thoroughly.
4-10 Mount the photo eyepiece and the PK-mount adapter
Put the photo eyepieces socket of the tri-ocular.
Connect the PK-mount adapter with the photo eyepiece, and then tighten the
lock-screw. (Fig.8)
4-11 Adjust the CTV
Adjust the CTV to a suitable position by rotating C-mount.
Note: The range of the adjustment: 1~2mm in general.(Fig.9)
4-12 Connect the Digital head With the Monitor or TV set
1) Plug one end of the PVA cable into the socket of the digital head. (Fig.10)
2) Plug the C-VIDEO or S-VIDEO of the PVA cable into the correct socket of Monitor (TV set).
Pole
C-mount
