14
Chapter 3.Installation
A16.1098
3.6 Electric platform
（
Figure7
＆
Figure8
）
①
Rotate the x-direction hand
wheel to move the platform to
the left to expose the hole as
shown in the figure, and screw
in M5 X 20 screws (not
tightened).
②
Turn the x-direction rotating
hand wheel to move the upper
platform plate to the right until
the three mounting holes are
exposed, and then screw in the
remaining three M5 X 20
screws.
③
Finally tighten the first screw.
④
Connect the platform port with
the corresponding port of the
control box with a connecting
cable.
⚫
In order to facilitate the
installation of the stage, the
transmission support can be
tilted back appropriately.
setscrew
X-axis
knob
Electric
platform
First mounting
screw hole
Figure 7
Figure 8
Connecting line
