17
Chapter 3.Installation
A16.1098
Figure 11
3.8 Electric condenser
（
Figure 11
＆
Figure 12
）
①
Align the condenser guide pin of
the electric rotary table with the
guide groove of the support, insert
the condenser into the transmission
lighting support, and then fix it with
the fixing screw.
②
Insert the aviation plug into the
corresponding aviation Jack
○
a at
the rear of the rack.
3.9 Mercury lamphouse
（
Figure 13
）
Insert the mercury lamp chamber
into the dovetail of the frame, and
tighten the side support screws
Figure 12
Guide pin
Electric condenser
Transmission
lighting support
Condenser
centering screw
Guide groove
Set screw
○
a
Set screw
Figure 13
