background image

22

 

 

Chapter 5 Maintenance and Storage                                        A16.1065

 

5.1 Cleaning   

Clean  or  disinfect  the  lenses  and  other  components  according  to  the  following 
instructions

.

 

Cleaning tools 

 

Blower 

 

Soft brush 

 

Soft cotton cloth, lens cleaning tissue, gauze, etc. 

 

Absolute alcohol (ethyl alcohol or methyl alcohol), medical alcohol 

 

Petroleum benzene (only for wiping immersion oil) 

   

CAUTION

 

 

Petroleum  benzene  and  absolute  alcohol  used  for  cleaning  are  highly  flammable. 
Handle  them  with  due  care,  and  keep  them  away  from  fire  or  sparks  and  when 
turning the power switch on and off.   

 

When  handing  petroleum  benzene  or  absolute  alcohol,  always  follow  the 
instructions provided by the manufacturer.   

 

Do not use organic solvents (such as alcohol, ether, and thinner) when cleaning 
painted, plastic, or printed parts of this product. Using organic solvents might result 
in discoloration or cause printed text to fade. 

 

Use petroleum benzene only when wiping off immersion oil from objectives. Do not 
use petroleum benzene to wipe the prism surface of the eyepiece tube or filters. 

 

5.1.1 Cleaning the Lenses 

Keep the lenses free of dust, fingerprints, and other dirt. Any dirt on lenses and filters 
will  degrade  the  image.  If  the  lenses  become  dirty,  clean  them  according  to  the 
following procedure.   

 

Cleaning off minor dirt (such as dust)

 

(1)

 

Use a blower or similar tool to blow off dust. 

(2)

 

If the above method does not work, dust off using a soft brush, or gently wipe off 

with a gauze. 
   

 

Cleaning off heavy dirt (such as fingerprints or oil stains)

 

Wipe off dirt using a soft clean cotton cloth, lens cleaning tissue, or gauze moistened 
with a small amount of absolute alcohol. (ethyl alcohol or methyl alcohol). 
   

 

Tips for wiping 

Do not wipe the lens surface using the same portion of a cloth or tissue more than once.

 

 

5.1.2 Cleaning Parts other than Lenses

 

 

Cleaning off minor dirt (such as dust) 

Wipe off using a silicone cloth. 

Cleaning off heavy dirt (such as fingerprints or oil stains) 

Gently wipe off using a gauze moistened with a small amount of a diluted neutral 
detergent solution. 

Summary of Contents for A14.1065





























Reviews: