8
2-2
Assembling step
2-2-1 Assemble and change the bulb (See fig.3)
◎
Lamp selected only: 6V/30W HAL bulb (Philips
5761)
★
Don’t touch the bulb with finger. If there is a
fingerprint, wipe it with clean and soft cloth.
1.
Hold the bulb
①
with clean glove or gauze and
insert the pins
②
to the jack
③
. Make sure the
bulb is vertical. (See fig.1)
★
Insert the bulb gently, or it will damage.
2.
Change the bulb
The bulb will become very hot when using or after
using. Whenever replace the bulb, cut off the main power
(make sure the power switch is “
○
”, disconnect the
power wire) and wait until the lamp holder and bulb cool
down.
2-2-2 Assemble the transmission illumination
groupware (See fig.4)
1.
Unbolt the screw
③
on transmission illumination
groupware
①
, and then insert the groupware into the
holder as figure shows.
2.
Rotate the groupware
①
in clockwise 90
°
to face
“AS” on color filter holder
④
forward. Meet the
bolt hole, which for screw
③
, to the counter bore
⑤
.
Then fix them with hexagon spanner.
2-2-3 Assemble the lamp holder (See fig.5)
◎
Insert the plug
①
to the socket
②
on the lamp
holder. Then meet the bolt
③
to the bolt hole
④
,
and insert the lamp holder into the illumination
groupware.
Fig 3
Fig 4
Fig 5
