21
6. Fluorescent Observation A16.1062
6.1 Fluorescent Set
（
Fig.30-31
）
The fluorescent set uses 3W LED as
illuminant and has two fluorescence
modules: B band fluorescence module and
G band fluorescence module or U band
fluorescence module. When the lever
①
is
adjusted to the leftmost end, it is B band
fluorescence module. When the lever is
adjusted to the middle, it is bright filed
observation state and adjusted to the right
is G band fluorescence module or U band
fluorescence module.
◎
Use mask
②
to prevent ultraviolet light from
damaging the retina.
◎
The power cord
③
behind the fluorescent
set is connected to the USB interface
④
on
the back of microscope, which is powered
by the microscope.
6.2 Installing
（
Fig.32
）
1. Mount the fluorescent set according to the
assembly path in Fig.32 into the round
dovetail of the microscope and tighten the
screw
Ⅰ
;
2. Mount the viewing head according to the
assembly path in the figure into the dovetail
of the fluorescent set and tighten the screw
Ⅱ
to fix the viewing head.
6.3 Method of Application
1. After connecting the power supply, turn on
the main switch. Connect the power cord of
fluorescent set (back) to the USB interface
on the back of microscope;
2. Press the brightness adjustment knob and
spin up to switch to the up lighting
3. Adjust the lever to the desired fluorescence
module position for observation.
①
②
Fig.30
Fig.32
Fig.31
Ⅰ
Ⅱ
③
④
③
