BUILDING YOUR OWN CABLES
SNAP High-Density Digital Module User’s Guide
14
BUILDING YOUR OWN CABLES
Header Cable
If you want to build your own SNAP-HD-BF6 header cable for use with a breakout rack, you will need the parts
listed below. Both ends of the cable use the same connectors.
Connector
: Molex 15-04-5401
Pin housing
: Molex 50-57-9320
Pins
: Molex p/n 16-02-0103
Cable
: Alpha 5020C or Manhattan M38910 (24 AWG, 10 conductor, 4x length needed) or equivalent (UL type
CM)
Wiring Harness
If you want to build your own wiring harness, you will need the parts listed below.
For SNAP-HD-ACF6:
Connector
: Molex 39-01-2165
Pins
: Molex 39-00-0214
Cable
: Belden 8308 (22 AWG, 16 conductor, shielded) or equivalent (UL AWM style 2464)
For SNAP-HD-CBF6:
Connector
: Molex 15-04-5401
Pin housing
: Molex 50-57-9320
Pins
: Molex p/n 16-02-0103
Cable
: Alpha 5020/40c (24 AWG, 40 conductor) or equivalent (UL type CM)
For complete wiring information, see form 1756, the
