Optiview Advanced 1080P, User Manual

Page: 283 / 340

Standalone DVR User’s Manual
273
Figure 5-91
Please refer to the following sheet for detailed information.
Parameter Function
Server IP It is to input ISCSI server IP address.
Port
It is to input ISCSI server port value. The default setup is 3260.
User
name/password
It is to input ISCSI server user name and password. Check the
Anonymous button if it supports anonymous login.
Set path You can click the Set path button to select the remote storage path.
Please note each path here stands for one ISCSI share disk. The path
has been generated when it is created at the server.
Add After you input the above information, click add button to add the new
information to the list.
5.8.4.7 RAID
RAID function is for some series product such as advanced 1080P 2U RAID series only.
Right now system supports RAID0/RAID1/RAID5/RAID10. Please refer to Appendix G for
detailed information.
5.8.4.7.1 RAID Config
The RAID configuration interface is shown as in Figure 5-92. In this interface, you can set
RAID type and settings.

Create manually: Check HDD manually to crate RAID.

Create RAID: Click it to automatically create RAID.
For create RAID function, you can select the physical HDD that does not included in the
RAID group or the created disk array to create a RADI5. You can refer to the following
situations:

There is no RAID, no hotspare disk: System directly creates the RAID5 and creates
one hotspare disk at the same time.

There is no RAID, but there is a hotspare disk: System creates the RAID5 only. It
uses previous hotspare disk.

There is RAID: System cancel the previous RAID setup and then create the new