OPS70CR Simple Install Guide
2
2.5 gals. Bladder Tank Shown
Completed
OPS70CR Installation
Service Contact
For local maintenance and service information, please
contact your nearest Authorized Service Representative.
Service inquiries may be directed to technical support at:
OptiPure, A Division of Aquion, Inc.
101 S. Gary Ave., Suite A
Roselle, IL 60172 USA
Phone #: 972.881.9797
E-mail correspondence to: [email protected]
Environmental Conditions
The OPS70CR is certified to operate under the following
conditions:
1. Altitude up to 2000 m.
2. Ambient Temperature of 40˚ - 105˚F (5˚ - 40˚C).
3. Maximum Relative Humidity 80% at 88˚F (31˚C).
4. Installation Category II.
5. Pollution Degree II.
6. Indoor use only, protect from elements.
Safety Instructions
1. Please read and follow these instructions when
connecting and using the system.
2. Securely bolt processor to wall before operating.
3. Avoid cross-connections and install on cold water
supply only.
4. Use approved air gaps when connecting to drain lines.
5. Do not exceed system pressure rating and use water
hammer arrestors when water hammer is evident.
6. Turn off feedwater supply before filter or membrane
cartridge replacement.
v
General Information
