OPS70CR Simple Install Guide
11
Step 13
OPEN the Feed Supply Valve and check for
leaks. Allow time for the tank to fill before
using connected equipment (this could take 30
minutes to several hours depending on the tank
capacity).
v
Place in Service
v
Quick Tank Fill
If a water supply to downstream
equipment is immediately
needed, the storage tank can be
quickly filled.
Step 13
Simply OPEN the Bypass Valve and un-filtered
water will flow directly into the storage tank.
When the tank is full, or a desired level is
reached, CLOSE the Bypass Valve. The system is
now in normal operating mode and the opti-
mized water will flow to the tank.
IMPORTANT: Do not leave the system in
bypass. This could result in damage to the
downstream equipment.
Tank Bypass
