OPS70CR Simple Install Guide
10
v
Connect to Equipment
Step 11a
Route and secure the 1/2” gray hose from the
Optimized Water Outlet on the Tank to the
downstream equipment connection.
Step 11b
Make the connection to the equipment. If used,
insert the barbed end of the 3/4” GHT connector
(supplied) into the 1/2” gray hose and secure
clamp. Connect ONLY to the treated/steam
water connection at the equipment. Do not
connect to the drain/condensate supply.
Step 12
Turn the Tank Valve to the OPEN position. The
installation is complete and the system is ready
to be placed into service.
Optimized Water
to Equipment
Step 11
Step 12
Tank Valve in
Open position
