UP-67ETH, UP-127ETH,
UP-247ETH, UP-367ETH
Digital power unit
UP-x7ETH version 1.1
45
N.B.: To be able to view the page, it
is necessary to deactivate the proxy
in the configuration of the web
browser.
6.8. Configured parameters edition
If required, the configurations of the amplifier can be edited. Proceed as follows:
1.
Open the installations screen of the P.A. Manager Software.
2.
In the installation structure, right click with the mouse on the name of the amplifier whose
configuration you wish to edit.
3.
Select
Edit Equipment
.
4.
The unit configuration window appears. Edit the parameters as required.
5.
Once the parameters have been configured, click on the button
OK
.
6.
Save the configuration by opening the
File
menu and selecting
Save
.
7.
Send the configurations to the unit (Section 6.5).
7.
CHANGE OF THE UNIT IP ADDRESS BY SOFTWARE
It is possible to change the IP configuration of the unit by means of the
IP ADDRESS DIP switches on the back of the amplifier or through the
software.
The software option allows the change to be made remotely, without the
need for access to the amplifier.
To make the change by software, from the operator screen of the P.A.
Manager software right click with the mouse on the zone selection icon
corresponding to the amplifier and select the option
Web Connection
(1).
If the PC is remote with respect to the installation, open the Internet browser and enter the IP of the unit
in the address bar (for example: http://10.1.1.20). This IP address is the address configured by means of
the IP ADDRESS DIP switches situated on the back of the amplifier.
In both cases, a web page belonging to the unit will load.
Proceed as follows:
1.
Enter the password in the
Administrator Login
section
(2)
(contact technical staff at Optimus and
they will provide you with this) and click
on the button
Login
.
(1)
(2)
