UMX-94R
Decoder Card for SMP94
ENGLISH
10
UMX-94R v1.1
It is possible to enter more than one value by writing the different addresses separated by commas. In
this way, if for example the values
1
,
2
,
14
are entered, access will be permitted to the zones between
1 and 48 and zones 313 to 336.
4
1st Message MP3:
Con
fi
gures which numbers will activate or stop the MP3 messages from the keyboard
of the SMP94 desk.
501: Activation of message 1 (entering 501 on the keyboard) to message 244 (entering 744).
To stop the message from the desk, enter 500 and press GONG+TALK.
601: Activation of message 1 (entering 601 on the keyboard) to message 144 (entering 744).
To stop the message from the desk, enter 600 and press GONG+TALK.
701: Activation of message 1 (entering 701 on the keyboard) to message 44 (entering 744).
To stop the message from the desk, enter 700 and press GONG+TALK.
5
Select
Mic Desk Priority
if you wish the priority level of the messages to coincide with the priority level
assigned to the desks connected to the SMP94 bus of the card (priority between 1 and 14).
6
Select
Card Priority
if you wish the priority level of the messages from the desks to coincide with the
priority level of the UMX-94R card itself.
7
If this option is selected, enter a priority level between 0
(maximum priority) and 63.
8
Select
Zone Selection Mode
if you wish the card to interpret the selections of the desk as zones (if
1+2+5 is keyed on the keyboard, the UMX-01/0 activates zones 1, 2 and 5).
9
Select
Group Selection Mode
if you wish the card to interpret the selections of the desk as groups (if
1+2+5 is keyed on the keyboard, the UMX-01/0 activates groups 1, 2 and 5).
10
Once the card has been con
fi
gured, press
OK
.
6. Downloading of con
fi
gurations
In the case of an SMP250
installation, the Server
PC is used to download
the con
fi
gurations to the
equipment.
In an installation without a
server PC, the con
fi
guration
must be downloaded to the
UMX-94R card by means of
a computer with the SCF-
01 software, through the
front download connector
of the UMX-01/0.
7. Technical speci
fi
cations
Power supply
Through the UMX-01/0
Consumption
130 mA.
Audio level (at maximum volume)
775 mV (0dBu)
Frequency response
70 ~ 19.000 Hz
Signal/noise ratio
> 72 dB
Number of zones
240
Controls
Audio level adjustment potentiometer
Format
1 slot in matrix
UMX-01/0
USB
PORT
USB/RS232
CONVERSOR
ETHERNET
UMX-01/0
SERIAL
PORT
CABLE
RS232
ETHERNET
(PIN to PIN
Connection)
Figure 12
Summary of Contents for UMX-94R
Page 6: ......
