Manual
15
DIY
DIY
• Your Optimum ThermoCook has three DIY programmes. Use these programmes to record custom settings for future use.
• To record your own DIY programme: Press this button, and the icon will flash on the LCD screen. Press the button again to select
between the three options:
• When the icon flashes, press and hold the DIY button for 5 seconds until the screen shows STEP:01
• Set your desired speed, temperature, heat power, and time; then press the DIY button again. You will see STEP:02 flash on the screen.
Adjust the settings for this step, repeat the previous until the end of the programme, up to maximum STEP:20. When you are finished,
hold the DIY button again for 5 seconds to save and record.
• To operate your desired DIY programme: Press the DIY button, select your desired DIY function, and press START to begin the recorded
programme .
• If you press the Stop/Cancel button while you are recording, the machine will stop recording and abandon the programme.
• To revise any DIY programme settings: If you need to revise previous settings while you are recording the programme, press the DIY
button. This will cycle through the available programme steps from STEP:01 until STEP:20, then return back to STEP:01.
• When a DIY programme is operating, your Optimum ThermoCook will stop for 10 seconds at the end of each step and beep. This
allows you to PAUSE the machine and add any ingredients you need for the next step. If you leave it idle during these 10 seconds, your
ThermoCook will continue with the next step in the programme.
• While the DIY programme is operating, you can adjust all settings without changing the recorded programme.
Pulse
• The Pulse function allows you to chop and mix ingredients at maximum speed. To use this function, simply press and hold this button for
the required time (usually 3-4 seconds).
• To crush ice or grind hard food, press the button in short bursts until you achieve your desired result.
Note: You cannot use the Pulse function if the temperature in the bowl is over 60°C.
Caution • If the measuring cup is not locked into position when using this function, ingredients might splash, resulting in burns.
We recommend always locking the measuring cup into place before using the Pulse function.
• Do not use mixing tool with this function.