Optimum Optimum 3292385, Operating Instructions Manual, Page: 18 / 80

Technical specification
Version 1.0.4 - 2020-10-13 18 Translation of original instruction
SD500AV
EN
SD500A
V_G
B
_2.
fm
2.7 Emissions
The noise emission of the metal band saw is 76 to 80 dB(A). If several machines are operated
at the location of the metal band saw, the noise exposure (immission) to the operator of the
metal band saw at the workplace may exceed 80 dB(A).
INFORMATION
This numerical value was measured on a new machine under the operating conditions specified
by the manufacturer. Depending on the age or wear of the machine, or the duty cycle of the
hydraulic unit, the noise behaviour of the machine may change. Furthermore, the noise emis-
sion also depends on production engineering factors, e.g. speed, material and clamping conditi-
ons.
INFORMATION
The specified numerical value represents the emission level and does not necessarily a safe
working level.
Though there is a dependency between the degree of the noise emission and the degree of the
noise disturbance it is not possible to use it reliably to determine if further precaution measures
are required or not.
The following factors influence the actual degree of the noise exposure of the operator:

Characteristics of the working area, e.g. size or damping behaviour,

other noise sources, e.g. the number of machines,

other processes taking place in proximity and the period of time, during which the operator
is exposed to the noise.
Furthermore, it is possible that the admissible exposure level might be different from country to
country due to national regulations.
This information about the noise emission should, however, allow the operator of the machine
to more easily evaluate the hazards and risks.
CAUTION!
Depending on the overall noise exposure and the basic threshold values, machine
operators must wear appropriate hearing protectors.
We generally recommend the use of noise and ear protectors.
2.8 Dimensions
16
87
1206
900
2129
99
0
1046