OPTIMUM
M A S C H I N E N - G E R M A N Y
Version 1.0.1 dated 2015-12-17
Page 68
Original operating instructions
MH25V
GB
4.8
Inserting the tool
4.8.1 Quick-change clamping system
The milling head is equipped with a collet chuck for tigh-
tening with pull stud BT30x45 °.
Tightening pull stud into the taper.
Clean the seat in the milling spindle.
Clean the cone of your tool.
Place the tool into the milling spindle. Put a 10mm
Allen key in the mounting hole and turn it clockwise
to open the collet chuck.
Img.4-1:
pull stud
4.8.2 Removal
Hold the tool.
Put a 10mm Allen key in the mounting hole and turn
it clockwise to open the collet chuck.
Img.4-2:
MAS BT30
11
7
43
23
M1
2
45°
