OPTIMUM
M A S C H I N E N - G E R M A N Y
Version 1.0.1 dated 2015-12-17
Page 55
Original operating instructions
MH25V
GB
1.9.4 Separation guard
Adjust the guard to the correct height
before you start working.
To do so, slacken the clamping screw, set
the required height and re-tighten the
clamping screw.
There is a switch integrated in the spindle
protection mounting which monitors the
closed position.
INFORMATION
The machine cannot be started, if the spin-
dle protection is not closed.
Img.1-2:
Separation guard
1.10
Safety check
Check the milling machine regularly.
Check all safety devices
before starting work,
once a week (with the machine in operation) and
after all maintenance and repair work.
General check
Equipment
Check
OK
Guards
Mounted, firmly bolted and not damaged
Signs,
Markers
Installed and legible
Functional check
Equipment
Check
OK
Emergency stop button
After the emergency stop button is pressed, the milling machine must
switch off. It must only be possible to restart the machine, if the emer-
gency stop button is unlocked and the ON switch has been pressed.
Separation guard around the
drill and milling spindle
The milling machine may switch on only when the guard is closed.
