12
//
O P T I M U M
M A M M A M I A
ASSEMBLING THE FROZEN TREAT HOUSING
1. Attach the Slow Juicer Housing (
5
) by pushing it into the matching slots on the Basic Unit
Housing (
6
). See notes in "Main Unit Housing Backplate" section for assembly.
2. Slide the Auger into the Slow Juicer Housing.
3. Slide the Frozen Treat Blocker (
3
) in place over the Juice/Frozen Treat Auger (
4
).
4. Attach the Seal Cap (
2
) by twisting it until it locks in place. The Seal Cap has an arrow that will
be centered on the housing when the Seal Cap is locked.
5. Place and twist the Star Extrusion Cap (
1
) until it locks into place.
6. Place the Pulp Collector on the outside of the Basic Unit Housing (refer to the "Frozen Treat
Mode" section).
1
Extrusion Cap Star Center*
2
Juice/Frozen Treat Seal Cap
3
Frozen Treat Blocker*
4
Juice/Frozen Treat Auger
5
Juicer Housing
6
Basic Unit Housing
7
Chute/Tray
8
Pusher
FROZEN TREAT PARTS
NOTE:
All Juicer attachments are marked
with a "
J
" to identify which parts are used for
juicing. The parts of each housing are also
color coded to help you identify which parts
are used with which housing.
*May be sold separately
PA RT S & A C C E S S O R I E S