Version 1.0.5 - 2021-01-29
100
Translation of original instruction
MH50G
│
MH50V
EN
M
H
50
G
_M
H
50
V
_
GB
_
8.
fm
7
Appendix
7.1
Copyright
This document is protected by copyright. All derived rights are reserved, especially those of
translation, re-printing, use of figures, broadcast, reproduction by photo-mechanical or similar
means and recording in data processing systems, either partial or total.
Subject to technical changes without notice.
7.2
Terminology/Glossary
7.3
Change information operating manual
Term
Explanation
Cross table
Supporting surface, clamping surface for the workpiece with traverse in
X and Y directions
Taper mandrel
Tool housing taper, drill taper, drill chuck taper.
Workpiece
piece to be milled, drilled or machined.
Draw bar
Threaded rod to fix the taper mandrel in the quill.
Tool - quick clamping system System with collet instead of a drawbar.
Drill chuck
Drill bit adapter
Collet
Holder for end mill
Drill-mill head
Upper part of the milling machine
Quill
Hollow shaft in which the milling spindle turns.
Milling spindle
Shaft activated by the motor
Drilling table
Supporting surface, clamping surface
Taper mandrel
Cone of the drill or of the drill chuck
Spindle sleeve lever
Manual operation for the drill feed
Quick action - drill chuck
Drill bit adapter can be fixed by hand.
Workpiece
Part to be drilled, part to be machined.
Tool
Milling cutter, drill bit, etc.
Emergency stop
Stops the operation of a machine.
Emergency switch-off
Interrupts the power supply to the machine.
Chapter
Short summary
new version number
all
Depth indication, mechanical safety quick-release system
1.0.1
parts
Electrical spare parts list, Wiring diagram
1.0.2
parts
Spare part drawings
1.0.3
3 ; 4.7.1
Interdepartmental tr speed tables
1.0.4
parts ; 4.3
MH50G Wiring diagram Integrated machine control from
SN 10762101001
1.0.5