Safety
Version 1.1.8 dated 2018-9-13
Page 61
Translation of the original instructions
B16H | B16HV
GB
B16H_B
16HV_
GB_
1
.f
m
OPTIMUM
M A S C H I N E N - G E R M A N Y
®
being expelled, but not to remove them completely. Always work carefully and observe
the limit values of your chipping process.
1.10
Safety check
Check the bench drilling machine before each start-up or at least once per shift. Inform the per-
son responsible immediately of any damage, defect or change in operating function.
Check all safety devices
at the beginning of each shift (with the machine stopped),
once a week (with the machine in operation),
after every maintenance and repair work.
Check that prohibition, warning and information signs and the labels on the bench drilling
machine
are legible (clean them, if necessary),
are complete (replace if necessary).
INFORMATION
Use the following table in order to organize the checks.
General check
Equipment
Check
OK
Protective covers
Mounted, firmly bolted and not damaged
Signs,
Markings
Installed and legible
Date:
checked by (signature):
Functional check
Equipment
Check
OK
EMERGENCY-STOP
Push button
After actuating an EMERGENCY STOP push button the bench
drilling machine must be switched off.
Limit switch protective
cover
V-belt
The bench drilling machine must not be switched on, if the pro-
tective cover of the V-belts is opened. An opening of the protec-
tive cover during machine operating turns off the machine.
Drill chuck protection
The bench drilling machine must only be switched on, if the drill
chuck protection is closed. The engine must switch off when the
drill chuck protection is opened during operation.
Date:
checked by (signature):
