Operation
Version 1.0.1 - 2020-10-14
15
Translation of original instruction
GBS75 | GBS150
EN
GBS
75_G
BS15
0_G
B.f
m
4.2
Switching on the machine
CAUTION!
Only press the emergency-stop button in a genuine emergency. You may not use the
emergency stop button to stop the machine during normal operation. The service life of
the emergency stop switch is not designed to stop the machine during normal operation.
4.2.1
Switching on
Check that the emergency-stop button is not pressed or is unlocked. Turn the emergency-
stop button to the right in order to release the push button.
Turn the step switch to the desired grinding speed.
Actuate the push button "ON".
4.3
Switching the machine off
Actuate the push button “Off”.
Disconnect the mains plug if the machine is not used for a longer period of time.
4.4
Adjusting the belt run correctly
ATTENTION!
Pull out the mains plug and first move the sanding belt by hand in order to estimate the
correct running of the sanding belt and to roughly adjust it. Only then switch on the belt
grinder and then readjust the run of the sanding belt with the knurled screw (1).
The belt run is adjusted by adjusting the knurled screw (1) at the front of the belt. By screwing in
the knurled screw, the tape reel moves in direction A. By unscrewing the knurled screw, the reel
moves in direction B. The sanding belt changes direction in opposite directions.
AB
1
