Optima WO141PI User Manual Download Page 196

Page: 196 / 240

Windows XP Information

D - 12 Attaching Other Displays

Configuring an External Display (ATI Catalyst Control Center)

You can use the

ATI Catalyst Control Center

to configure any attached displays.

1. Attach your external display to the external monitor port or HDMI-Out port, and turn

it on.

2. Go to

ATI Catalyst Control Center

(see page

D - 9

3. Select

Displays Manager

from the

Graphics Settings

Tree View pane.

4. Attached displays will appear in the

Desktop and Display Setup

box (if disabled

the display they will appear in the box below).

5. Right-click, the attached display icon to bring up the Display Mode options.
6. Select an option from the menu, and click

Yes

to accept the settings.

7. Click

to save the changes.

Detect Displays

Click

Detect Displays

(button) to automati-
cally update the at-
tached display
information.

Configure the

Display

Detection Option

from

Display Options

in the

Graphics Settings

Tree View pane. You
can configure the

Cata-

lyst® Control Center

to manually or automati-
cally detect attached
displays.

Figure D - 8

Displays Manager

Drag and drop (or right-
click) any attached dis-
plays for display options.

Summary of Contents for WO141PI

















































































































































































































































Search results

Summary of Contents for WO141PI

Reviews:

Related manuals for WO141PI

Brands by name

Popular brands

Optima WO141PI, User Manual

Search results

Summary of Contents for WO141PI

Reviews:

Related manuals for WO141PI

Brands by name

Popular brands