Optima ESGO 4000, Installation Instruction

Page: 8 / 21

8
2. SYSTEM COMPONENTS
2.1 Mechanical Components
Main mechanical elements forming the construction are heavy duty, base plate,mechanism
and anchoring plate. It’s made of steel S235JR / RAEX 250 – quality 37 at least. A Rubber wheel is
used to prevent vibration and noise of sliding gate. The shafts are made of hardened. Parts forming
the drive unit, namely, gears, motor, etc. are very precisely manufactured so that they can stand
harsh environmental conditions
. All the parts are hot dip galvanized (60 micrometers) / Rust-
Prevention (Epoxy Coated) painted in order to prevent rusting.The electromechanical sliding gate
operator will be installed in reinforced concrete foundation.
1. Helical Gears
2. Transmitter Rod
3. Alignment Bearings
4. Pinion
5. Reducer
6. Mechanism Base Plate
7. Anchoring Plate
Picture 2. Sliding Gate Mechanism
www . optima-engineering . com