Optima Scale OPH-Z User Manual Download Page 13

Page: 13 / 16

Note: The grey colored text explain the signal's meaning which flash on the window.

* The grey colored sections are the following operation after Step 1-3 baud rate Setting.

Communication Settings

Key (Order) Step Explanation

LCD Screen

Display

1. Display Menu

2. Enter into Communication Setting

3. Enter into Baud rate Setting

* Press [PRINT] key and select different baud rate in turns:

12: 1200bps, 24: 2400bps, 48: 4800bps, 96: 9600bps

4. Enter into Machine ID Setting

* Operator can set Machine ID from 001 to 255,

Press [UNIT] key to move the cursor and press [PRINT] key to select the number.

4. Enter Into Data frames format Setting

* Press [PRINT] key can select ASC ( ASCII format ) or ATU ( Modbus ATU ).

4. Enter Into Communication Way Setting

* Press [PRINT] key can select : NON: turn off communication,

CON: communicate continuously, STY: communicate while steady,

KEY: communicate only press [PRINT] key, SOFT: communicate with software,

Txxx: communicate every XX seconds (Can set time manually).

4. Print Way Setting

* Press [PRINT] key can select :

NON: turn off print, KEY: print only press [PRINT] key, SOFT: print by software order,

Txxx: print every XX seconds (Can set time manually).

4. Peripheral Equipment Setting

* Press [PRINT] key can select : KEY.PRT, KEY.COM, KEY.ALL, KEY.NON
* Short Press [CAL] key to select KEY.PRT and return:

Machine send signal to printer when press [PRINT] key.

Short Press [CAL] key to select KEY.COM and return:

Machine send signal to computer when press [PRINT] key.

Short Press [CAL] key to select KEY.ALL and return:

Machine send signal to printer and computer both when press [PRINT] key.

Short Press [CAL] key to select KEY.NON and return:

Press [PRINT] key NO SIGNAL CAN SEND OUT.

5. Confirm and return to previous menu
6. Finish Setting and return to standby

Press and Hold

[MENU] Key
Short Press [MENU]

Key Two Times
Short Press [CAL] Key

Short Press [MENU] Key

Short Press [CAL] Key
Short Press [TARE] Key

Summary of Contents for OPH-Z

















Search results

Summary of Contents for OPH-Z

Reviews:

Related manuals for OPH-Z

Brands by name

Popular brands

Optima Scale OPH-Z, User Manual

Search results

Summary of Contents for OPH-Z

Reviews:

Related manuals for OPH-Z

Brands by name

Popular brands