Optima Scale OPH-Z User Manual Download

Page: 12 / 16

Backlight On/Off Setting

Operator can turn on/off/auto backlight in the setting menu.

Buzzer On/Off Setting

Operator can turn on/off the buzzer sound by setting menu.

Note: The grey color words explain the signal's meaning which flash on the window.

1. Display Menu

2. Enter Into Setting Menu

3. Display weighing range and precision menu

4. Enter into backlight setting and flash "ON"

5. Backlight turn on/off automatically and
flash "AUT"

6. Confirm the backlight setting and return

7. Finish the setting and return to standby

Instance

Key (Order) Step Explanation

LCD Screen

Display

Press and Hole

[MENU] Key

Short Press [MENU] Key

Short Press [CAL] Key

Short Press [MENU]

Key Five Times

Short Press [PRINT] Key

Short Press [CAL] Key

Short Press [TARE] Key

1. Display Menu

2. Enter Into Setting Menu

3. Display weighing range and precision menu

4. Enter into buzzer setting and flash "ON"

5. Turn off buzzer and flash "OFF"

6. Confirm the buzzer setting and return

7. Finish the setting and return to standby

Instance

Key (Order) Step Explanation

LCD Screen

Display

Press and Hole

[MENU] Key

Short Press [MENU] Key

Short Press [CAL] Key

Short Press [MENU]

Key Six Times

Short Press [PRINT] Key

Short Press [CAL] Key

Short Press [TARE] Key

Summary of Contents for OPH-Z

















Search results

Summary of Contents for OPH-Z

Reviews:

Related manuals for OPH-Z

Brands by name

Popular brands

Optima Scale OPH-Z, User Manual

Search results

Summary of Contents for OPH-Z

Reviews:

Related manuals for OPH-Z

Brands by name

Popular brands