NLFS-L-
B User’s Manual
Page 9 of 13
Optilab, LLC
600 E. Camelback Road, Phoenix, AZ 85012
Phone: 1-602-343-1496, Fax: (602) 343-1489, Email: [email protected]
4. Service and Support
4.1 Warranty
Optilab, LLC guarantees its NLFS-L-B unit to be free of defects for
1 year from the date of shipment. The guarantee does not cover
any damages resulting from the misuse or improper handling of the
equipment, or any incidental or consequential loss. Note that the
warranty will be void upon any attempt to open or to fix the
equipment by the user without prior approval of Optilab, LLC.
4.2 Service and Calibration
Your NLFS-L-B unit has been designed to provide years of trouble-
free operation. No internal maintenance is required provided that
the equipment is properly handled, operated, and kept away from
contamination. For any questions regarding the operation and
performance of the unit, please contact Optilab, LLC at:
Optilab, LLC
600 E. Camelback Road
Phoenix, AZ 85012
Phone:
1-602-343-1496
Fax:
(602) 343-1489
Email: [email protected]
4.3 Care of Fiber-optic Connectors
Damage to optical connectors account for more than 70 percent of
equipment performance degradation. To avoid such damage, the user
should use only industrial grade 99% pure isopropyl alcohol and follow
the procedures below to keep the connectors, adaptors, and receptacles
clean.
Cleaning Optical Connector End-face with Wipe and Alcohol
To properly clean optical connectors utilizing lens tissue grade wipes and alcohol
follow the procedure below. The moist wipe removes dust particles, oil and
contaminants that may damage or block the end-face of the connector during
connection. The dry wipe removes residual alcohol that may be ignited by optical
emission.
1. Disable the optical output and turn off unit to prevent accidental exposure or
damage to the optical connector by optical emission.
2. Moisten a wipe with alcohol by placing on top of the alcohol dispenser and
push down to saturate the wipe.
