DFB-CWDM-M Module
User’s Manual
Page 3 of 7
- 3 -
Page 3
2/25/2022
Optilab, LLC
600 E. Camelback Road, Phoenix, AZ 85012
Phone: (602) 343-1496, Fax: (602) 343-1489, Email: [email protected]
2.3 Panel Diagrams and Controls
F
EATURE
F
UNCTION
AC
P
OWER
S
OCKET
AND
S
WITCH
The AC power socket is the input for the AC power source.
A three-pin standard power cord should be used to connect
this equipment to any 110 or 220 V main supply. This
corresponding switch supplies power to the main unit, to
enable and disable the laser respectively.
P
OWER
LED
I
NDICATOR
This LED indicator is to ensure the proper 110/220 VAC
supply voltage is active to the unit, and the internal DFB is
operational.
RF
I
NPUT
P
ORT
This 50Ω SMA port is used to supply an appropriate RF
signal for direct modulation of the DFB, up to 1 GHz
bandwidth. Contact Optilab for details.
O
PTICAL
O
UTPUT
P
ORT
The optical output receptacle for the module unit. This
particular receptacle is LC/UPC type.
P
OWER
A
DJUST
K
NOB
Turning this knob will increase (Clockwise) or decrease
(Counter Clockwise) the output power of the internal DFB
laser.
USB
2.0
P
ORT
Connecting this port to a PC device will allow for remote
monitoring of the device for power on status.
1
2
3
DFB-CWDM-M Module Panels
4
5
6
