Page 10
1. Turn the main switch
①
to “O”(off) before
connecting the power cord. (Fig.15)
2. Insert the cable into the power socket of
the microscope. (Fig.16)
3. Plug the power cord into the mains sock
-
et. Check for a safe connection.
► Please use the supplied power cord.
If lost or damaged, please refer to
qualified service.
► Connect the power cord to a grounded
(earthed) power supply only.
Before replacing the fuse, turn the main switch
to “O” (off) and unplug the power cord.
Rotate the fuse support out of the holder using
a straight screwdriver. Insert a new fuse in the
support, then rotate the support back into the
holder. (Fig.17)
►
Fuse rating:
see back of the microscope.
Connecting the power cord
Replacing the fuse
Fig.15
Fig.16
Fig.17
①