13
4
General configuration options
4.1
Opticon Universal menu book
The OPR3301 supports various configuration options that can be found in the Opticon
Universal menu book. This makes it possible to customize the OPR3301 to your own
needs and requirements. The latest Universal menu book can always be found on our
web site.
The OPR3301 supports (most of the) menu options listed in the following chapters:
1. Defaults (Bluetooth SPP, Bluetooth HID)
2.1. RS232 options (for the CRD3301 only)
2.2.1. Keyboard language
2.2.2. Special keyboard options
2.3. Bluetooth options (See chapter 3)
3.1 Enabling/disabling readable codes *
3.2 Setting of fixed, minimum and maximum lengths
3.3 Code specific options (almost all options are supported except some 2D
decoder options)
4.1 Case conversion
4.2 Set prefixes
4.3 Set suffixes
5.1 Read modes, add-on wait modes, trigger repeat
5.1.1 Multiple read reset time
5.1.2 Quite zone options (margins)
5.2 Read time options
5.4 Redundancy
5.5 Positive and negative barcodes
6 Indicator options (Buzzer and good read LED options)
7.1 Diagnostics
7.2 Serial configuration options (excluding 'disable laser' and 'error message'
options)
The following barcode types can be read by the OPR3301:
EAN 8, EAN-13, UPC-A, UPC-E, UPC-E1
Code 39 + Full ASCII
Code 93
Code 128 / EAN 128
Interleaved 2 of 5 / Industrial 2 of 5
IATA
MSI plessey
S-Code / Matrix 2of5 / Chinese post 2of5
Telepen
UK/Plessey
Tri-optics
Italian Pharmaceutical
Codabar Normal, ABC, CX
ISBN, ISSN, ISMN
All GS1 DataBar variants (formerly known as RSS)
Korean Postal Authority code
PDF417 / MicroPDF417 / EAN•UCC Composite codes
Codablock-F
5
Configuration via serial commands
When using the Bluetooth SPP default (see chapter 1.1) it is also possible to configure
the OPR3301 by sending serial commands to the OPR3301. More information about
the use of serial (RS232)-commands can be found in Chapter 0 of the Universal menu
book.
