11
2
Bluetooth connection labels
Below you will find a list of connection control labels, which can be useful to quickly
reconnect or disconnect your OPR3301.
Manually connect
Manually disconnect
Make discoverable and
connectable
Manually unpair *
* Note: Reading the 'unpair' label will force the OPR3301 to redo the pairing on the next
connection attempt. This can be useful in situations that you don't want unauthorized
people to connect your OPR3301 to your remote device.
3
Bluetooth configuration options
The OPR3301 has various special configuration options to customize the OPR3301 to
your own preferences. Below these options will be briefly mentioned. For more
information and the actual configuration labels to use these options, please refer to
chapter 2.3 of the Universal menu book.
3.1
Configuring a Bluetooth address without Bluetooth address label
In case you're in the situation that you want to connect the OPR3301 to a Bluetooth
device, but you don't have the possibility to print a Bluetooth address label containing
the Bluetooth address, then it's also possible to configure the Bluetooth address using
the Universal menu book. The Set/End Bluetooth address labels can be found in
chapter 2.3.1 including more information on how to use them. The direct input labels of
chapter 4.3.3 can be used to enter the 12 digits of the Bluetooth address.
3.2
Bluetooth security options
In situations that you want a more secure Bluetooth connection there are a couple of
menu options available for this purpose. Using these options it is possible to change
the default passkey (PIN-code), enable encryption and make authentication mandatory.
These options are described in chapter 2.3.2 of the Universal menu book. It's also
possible to read the unpair label on the previous page to ensure that the OPR3301
needs to pair again the next time it is used.
3.3
Trigger-to-connect options
By default the OPR3301 can reconnect by pressing the trigger key for 5 seconds. This
option can be disabled and also the time of 5 seconds can be changed between 1 and
9 seconds.
When you're using the OPR3301 in slave mode, it's also possible to make your
OPR3301 discoverable and connectable again by pressing the trigger key by enabling
the 'Trigger to make connectable/discoverable' option.
More information about these options can be found in chapter 2.3.3 of the Universal
menu book.