Opticon OPN2002, Demo Application Manual

Page: 3 / 19

3
3 Customizing your OPN
In the following section a brief overview is given on how to configure your OPN for your
desired application.
3.1 Selecting the USB interface (VCP or MSD)
This batch demo application supports 3 methods of retrieving your barcode data file from
the OPN:
•
USB Mass Storage Device (MSD)
•
USB Virtual Com Port (USB-­‐VCP) using NetO32 to retrieve the file
•
CRD2000 multicradle using NetO32 to retrieve the file (OPN2002 only)
After loading this software on the OPN for the first time, the application will automatically
be reset to USB-­‐VCP default.
If you would like to use your OPN as a USB Mass Storage Device, read the label below.
(The labels below can be read without reading any SET/END labels)
USB-MSD default
More information on how to use your OPN as USB Mass Storage Device will be given in
chapter 8.
To switch back to USB-­‐VCP default (i.e. to load software) read the label below.
USB-VCP default
More information on how to use your OPN as USB-­‐VCP will be given in Chapter 7.
Independent of whether you configured your OPN2002 as Mass Storage Device (MSD) or as
USB-­‐VCP, it’s allows possible to transmit your barcodes using the CRD2000 multicradle in
combination with the NetO32-­‐file transfer application.