manualshive.com logo in svg

Opticon OPN2002, Demo Application Manual

Share
Download
Opticon OPN2002 Demo Application Manual Download Page 14

   

14   

Software   V3531x:   OPN2002   Bluetooth   demo   application   

   
This   application   turns   the   OPN2002   into   a   Bluetooth   barcode   scanner,   which   currently   
supports   the   following   features:   
   

§

 

Connecting   to   a   remote   device   (as   master)   and   transmit   its   data   using   a   Bluetooth   
virtual   COM   port   (VCP)   

   

§

 

Making   the   OPN2002   connectable   (as   slave)   and   discoverable   to   allow   a   remote   device   
to   connect   with   the   OPN2002   and   transmit   its   data   using   a   Bluetooth   virtual   COM   port   
(VCP)   

   

§

 

Use   the   OPN2002   as   a   Bluetooth   HID   device   (keyboard)   

   

§

 

(Limited)   Opticon   Universal   menu   book   support   to   configure   barcode   decoders,   pre-­‐   
and   suffixes,   read   modes,   buzzer/LED   settings,   change   Bluetooth   configurations   and   
switch   between   HID   or   VCP   as   Bluetooth   interface.   

   

§

 

Use   of   the   trigger   and   clear   key   to   connect,   disconnect,   make   discoverable   /   
connectable   and   reconnect.   

   

§

 

iPhone   /   iPad   compatibility   

   

Note:   Source   code   will   be   available   for   editing   by   using   the   provided   SDK   

   

Software   V3553x:   Advanced   Bluetooth   application   

   
This   application   has   been   developed   for   the   OPR3301   barcode   scanner,   but   it   also   
compatible   with   the   OPN2002.      
   
This   application   is   very   similar   to   the   Bluetooth   demo   application   (V3551x)   listed   above,   but   
supports   more   of   Bluetooth   options   that   are   listed   in   the   Universal   menu   book.   
      
This   application   is   recommended   when   the   OPN2002   is   used   as   replacement   for   the   old   
OPL2724   /   OPL7724   and   when   memorizing   of   barcodes   is   desired,   when   if   the   OPN2002   
has   lost   its   Bluetooth   connection   or   is   out-­‐of-­‐range.   
   

Note:   No   source   code   will   be   available   for   editing   

Summary of Contents for OPN2002




















Reviews:

No comments

Brands by name

Popular brands

Load more brands