manualshive.com logo in svg

Opticon OPL 2724 ZAPPER, Specification Manual, Page: 25 / 27

Share
Download
Opticon OPL 2724 ZAPPER Specification Manual Download Page 25

Opticon 

OPL 2724 

Specifications Manual 

 
 
 
 

 

25 

15.5. R&TTE 

This scanner conforms to the following standards of the Radio and Telecommunications 
Terminal Equipment (R&TTE) directive from the EU. 

EN300 328 

EN301 489 

IEC60950-1 

EN60950-1 

15.6. Radio  Law 

The scanner qualifies as radio equipment for low-power radio stations (2.4 GHz band 
advanced data communication systems) as specified in the Radio Law 38-24-1. 

The scanner has obtained the Certification for Construction Design of Specified Radio 
Equipment. It does not have a radio station license in Japan. 

The following activities are prohibited under the Radio Law: 

•

  Remodeling and disassembly 

•

  Peeling off the certificate label 

15.7. State of California: Perchlorate Best Management Practices 

The batteries on some Opticon products may contain Perchlorate. To comply with 
California Perchlorate Best Practice Regulations and the Law for the Promotion of 
Utilization of Recyclable Resources (Japan), products that may contain Perchlorate 
materials should be properly labeled on the exterior of all outer shipping packages and/or 
in locations that otherwise satisfy the California Perchlorate Best Management Practices. 

Summary of Contents for OPL 2724 ZAPPER




























Reviews:

No comments