Opticon OPL 2724 ZAPPER, Specification Manual, Page: 20 / 27

Opticon
OPL 2724
Specifications Manual
20
Symbology Read Transmit
Code
Length
Transmit
CD
Calculate
CD
Set
Prefix
Set
Suffix
Other
As a single
component, only
1D+2D component
is allowed
GS1-128
(EAN/UCC-128) X X — — — CR Disable
concatenation
GS1 DataBar
(RSS) (all, incl.
CC-A/B);
Omnidirectional/
Truncated/
Stacked/Limited/
Expanded X X
„
— — CR Transmit
Application
Identifier
IATA „ X „ X — CR
Industrial2of5
„
X
„
X
Not checked
— CR
Interleaved2of5
„
X
„
X
Not checked
— CR
ISBN-ISMN-
ISSN X X — — — CR
Korean Postal
Code (Code
3of5) X X X — — CR
Matrix2of5 X X
„
X — CR
MicroPDF417 „ X — — — CR
PDF417 „ X — — — CR
MSI/Plessey
„
X „ CD1 „ CD1 — CR
UK/Plessey
„
X
„ „
— CR Disable space
insertion
Disable A to X
conversion
S-Code
„
X
„
X — CR Numeric mode
Tri-Optic „ X — — — CR Not transmit ST/SP
Notes:
In the “Reading” column, “ „ ” means “Enable reading” and “X” means “Disable reading.”
In the “Transmit code length” column, “ „ ” means “Transmit code length”
and “X” means “Do not transmit code length.”
In the “Transmit CD” column, “
„ ” means “Transmit check digit”
and “X” means “Do not transmit check digit.”
In the “Calculate CD” column, “
„ ” means “Calculate check digit”
and “X” means “Do not calculate check digit.”
“— “ means “not supported.” In the “Prefix” column, “—“ means “there is no prefix setting.”