Opticon OPI 2201 Specification Manual Download Page 5

Page: 5 / 59

Opticon

OPI 2201

Specifications Manual

13.

Packaging Specifications ........................................................................................................ 42

13.1.

Individual Packaging Specification.................................................................................... 42

13.2.

Accessory Specifications .................................................................................................. 42

13.3.

Collective Packaging Specification ................................................................................... 43

14.

Durability ................................................................................................................................... 44

14.1.

Electrical Noise ................................................................................................................. 44

14.2.

Static Electricity................................................................................................................. 44

14.3.

Shock ................................................................................................................................ 44

14.3.1.

Drop Test (without packaging).................................................................................................44

14.3.2.

Drop Test (with individual packaging)......................................................................................45

14.4.

Vibration Strength ............................................................................................................. 45

14.5.

Dust and Drip Proof........................................................................................................... 45

14.6.

Cable Strength .................................................................................................................. 45

14.7.

Cable Bending Test........................................................................................................... 45

15.

Reliability................................................................................................................................... 46

16.

Trigger and Read Options ....................................................................................................... 47

16.1.

Trigger Modes ................................................................................................................... 47

16.2.

Read Modes...................................................................................................................... 47

16.3.

Auto Trigger Options ......................................................................................................... 48

16.3.1.

Auto Trigger Overview .............................................................................................................48

16.4.

Image Capture Options ..................................................................................................... 49

17.

Trigger and Read Settings....................................................................................................... 50

17.1.

Read Time Settings........................................................................................................... 50

17.1.1.

Read Time................................................................................................................................50

17.1.2.

Multiple Read Reset Time........................................................................................................51

17.2.

Auto Trigger Settings ........................................................................................................ 52

17.2.1.

Enable/Disable Settings...........................................................................................................52

17.2.2.

Auto Trigger Sensitivity Settings..............................................................................................53

17.3.

Setting Image Capture Mode ............................................................................................ 54

17.3.1.

Configuring Gamma Values.....................................................................................................55

18.

Regulatory Compliance ........................................................................................................... 56

18.1.

Laser / LED Safety ............................................................................................................ 56

18.1.1.

Laser / LED Safety...................................................................................................................56

18.1.2.

LED Safety...............................................................................................................................56

Summary of Contents for OPI 2201




























































Search results

Summary of Contents for OPI 2201

Reviews:

Opticon OPI 2201, Specification Manual, Page: 5 / 59

Search results

Summary of Contents for OPI 2201

Reviews: