Opticon
OPI 2201
Specifications Manual
48
16.3. Auto Trigger Options
16.3.1.
Auto Trigger Overview
To capture a barcode, the scanner
uses ambient light to detect differences
in contrast between the light and dark
areas of a barcode.
If the scanner is in auto trigger mode
and it detects differences in movement,
it begins scanning. Different time
values can be specified to control how
sensitive the scanning operation is to
movement.
Figure 32: Auto trigger detection area
Conditions
Auto trigger is enabled when inserting a silver gray-colored paper on a black backing paper.
Trigger is also enabled when inserting a black-colored paper on a silver-gray backing paper.
Paper used for the test:
Black paper from Glory (Black 010010016)
Gray paper from Glory (Silver-gray 010010016)
Size of backing paper:
Larger than the scanning area
Size of detected paper:
Larger than the detection area
Moving speed:
105 mm/s or slower
Ambient temperature and humidity:
Room temperature and humidity
Ambient illuminance:
300 lx or higher
Figure 33: Auto trigger specifications