- 12 -
(10)
How to add IP camera (encoder) source.
From source list(C), select IP camera (encoder) source and click add(+) button, then
below window will pop up.
If you select “Searched IP camera (encoder) Add”, click search button to find IP
camera (encoder) list from local network. Select IP camera (encoder) need to be
added from the list. If certification is needed to use IP camera (encoder), click
particular IP camera (encoder) and type in user account and password and click
Certify & Add button to add IP camera (encoder) on the list.
* IP camera (encoder) that doesn’t support ONVIF protocol won’t be shown.
If you select “Manual IP camera (encoder) Add”, ONVIF Device Service Address will
be filled in when typing IP address (it can be changed if there is other address). If
certification is needed, type in user account and password and click ‘Attempt ONVIF
Request’ button, then Main/Sub Stream URL will be automatically filled in.
* Main/Sub stream URL will not get filled in after clicking ‘Attempt ONVIF Request’
button if IP camera (encoder) that doesn’t support ONVIF protocol.
If Main/Sub Stream URL is known from IP camera (encoder) manual, user can type in
URL without clicking ‘Attempt ONVIF Request’ button.
* Device will not be added if typing wrong user account/password, or if device
doesn’t support H.264 1080p or 720p.