- 6 -
5.
Installation
5.1
Hardware Installation Procedure
Important: Please follow below procedure. If not installed properly, it could suffer
malfunction.
Step 1
Unpack the package.
Step 2
Turn on network storage (or PC), Display, Network Switch(L2/L3)
Step 3
Turn on the PC that has installed MPDS-100 PC application and connect LAN cable
(CAT5e/CAT6) to network switch.
Step 4
Connect MPDS-100 to network switch with using LAN cable (RJ-45)
Step 5
Connect MPDS-100 to monitor (HDMI OUT). If using external speaker, connect MPDS-100
to speaker (LINE OUT)
Step 6
If needed, connect Keyboard/Mouse for local UI control.
Step 7
Connect 5V power adapter.
5.2
Reset and Factory Reset
♦
Reset : Device will reboot when reset button is pressed shortly
♦
Factory Reset: Press and hold reset button for approximately 5 seconds, then LED of
device will turned OFF for factory reset after LED blinking.