Installation
Important: Please use the installation procedure below. Improper, or no
operation may result if the start-up sequence is not correctly followed.
Step 1
Carefully unpack the contents of the shipping group.
Step 2
With system power turned
off
, connect the upstream Transmitter box to the
DVI receptacle of PC by one dual link DVI copper cable in the shipping group.
Figure 2 – Connection of DVI cable between Transmitter box and PC
Step 3
In the same way as above, connect the Receiver box into the DVI receptacle
of the display by the other dual link DVI copper cable.
Figure 3 – Connection of DVI cable between Receiver box and the display
Warning:
Please DO NOT look directly into the LC receptacles of the
Transmitter box, while it is powered on, although this product is regulated
strictly enough to operate under the Laser Class I, classified by CDRH/FDA
for eye safety.
1-2 Installation
Welcome!
Congratulations on your purchase of the M1-2R2VI-DU, Optical Dual Link DVI
Module. This manual contains information that will assist you in installing and
operating the product.
Product Description
The M1-2R2VI-DU module offers 100 meters extension of dual link high-
resolution digital graphic data over fiber, directly connected between PC and
displays, supporting dual link DVI. Two boxes, located one by the PC and the
other by the display are connected to each of them by a 1.0 m dual link DVI
copper cable. Between two boxes, the 8 LC patch cord fiber bundled cable
enables to transmit 7 channels (R, G, B, Clk, R2, G2, B2) of graphic data over
it and the Digital Display Channel (DDC2B) interface are performed over a
bundled copper cable, so called as DDC cable, which has RJ-45C connectors.
Shipping Group of
M1-2R2VI-DU Optical Dual Link DVI Module
Tx and Rx boxes:
One (1) Transmitter (Tx) Box and One (1)
Receiver (Rx) Box.
Two (2) dual link DVI copper cables:
1.0m
Option: DDC cable (UTP for LAN) with RJ-45C
.
Option: 7 LC Patch Cord fiber bundled cable (Multimode glass
fiber)
.
AC/DC power adapter:
One (1) +12V units
User’s Manual
Figure 1 – Overall Optical dual link DVI Module
1-1 Welcome, Product Description
