- 14 -
♦ EDID read from a host (TX).
(1) Select one of a host (TX) on the list. Connect a display to HDMI OUT receptacle of the
selected TX over HDMI cable.
(2) Click
‘Read EDID’ button. Then, you can see the saved EDID data as below.
* T
he TX isn’t connected with display monitor, you can see ‘Fail’ message.
♦ EDID write from a host or a client to all hosts (recommended)
After you read EDID data from a client or host, you can write the saved EDID data on the
clipboard to all TXs or selected one.
(1) Select all TXs ( all hosts recommended)
(2) Click
‘EDID write’ button.
