![background image](http://html1.mh-extra.com/html/opticis/cndf-200/cndf-200_user-manual_1641705005.webp)
Product Specifications
CNDF-200, Component video to 1-fiber DVI converter
Extension limit:
500 meters (1640 feet) for 1080p (1920x1080),
60Hz refresh rate.
Graphic transmission bandwidth:
Supports up to 1080p
(1920x1080), 60Hz, or 1.485Gbps bandwidth per graphic channel.
Supporting resolution:
480i, 576i, 480p, 576p, 720p, 1080i, 1080p
Fiber-optic connection:
CNDF-200 has one (1) SC receptacles so
as to be connected with one (1) SC multi-mode fiber, having 62.5
(50) / 125
m core.
Dimensions (WDH):
104 x 112 x 28mm
Environmental Specifications
Operating temperature: 0°C to 50°C
Storage temperature: - 30°C to 70°C
Humidity: 0% to 85%
AC/DC Power Adapter
Power Input:
AC 100-240V, 50/60Hz 0.1A
Power Output:
+5 V, 3A SMPS DC-power Adapter
Cord DC Jack:
Core is 5 V and outer is GND.
1-6 Product Specifications
Installation
Important: Please keep the installation procedure below. Improper or no
operation may result if the start-up sequence is not correctly followed.
Step 1
Carefully unpack the contents of the shipping group.
Step 2
Plug and fasten the 5V power adapters to the
+5V DC
jack on the rear side of
converter. Ensure the Power LED ON (Blue).
Step 3
Connect the Component video source to CNDF-200 over 3 RCA cable.
Please make sure the firm connections between
Y to Y IN, Pb to Pb IN and
Pr to Pr IN
. If the Component video source is active, status LED (Blue) will be
turned on.
Step 4
Connect the
OPTICAL OUT
to 1-fibe DVI receiver, DVFX-100-R over multi-
mode SC-SC optical fiber.
Step 5
Plug DVFX-100-R to DVI input port of display.
Step 6
If you need on-site monitoring, connect
Y OUT, Pb OUT and Pr OUT
on the
front side of converter to Component video input port of local display over 3
RCA cable.
1-3 Installation