Regulatory Statements
This device complies with part 15 of FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. This equipment has been
tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 and 2 of FCC Rules, EN 55022/55024/61000-3 for CE
certification. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and. if not installed and used in accordance with the instruction guide,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and the
receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult a service representative for help.
Properly shielded and grounded cables and connectors must be used in order
to comply with FCC/CE emission limits. Changes or modifications not
expressly approved by the party responsible for compliance could void the
user s authority to operate the equipment.
1-8 Regulatory Statements
Welcome!
Congratulations on your purchase of the Component video to 1-fiber DVI
converter,
CNDF-200
. This manual contains information that will assist you in
installing and operating the product.
Product Description
The
CNDF-200
, Component video to 1-fiber DVI converter receives
Component video up to 1080p (1920x1080), 60Hz signal and converts to
optical signal and transmits up to transmits 500 meters (1640feet) over one (1)
SC multi-mode fibers. OPTICIS 1-fiber DVI receiver, DVFX-100-R is used as a
pair to recover 1 fiber DVI to electrical DVI.
Shipping Group
CNDF-200, Component video to 1-fiber DVI converter:
One (1) unit
AC/DC power adapter:
One (1) unit of +5V, 3A (Locking type)
User
’s Manual
Option Product:
Mounting bracket
1-1 Welcome, Product Description
