Optical Systems Design OSD8826 Series, Operator'S Manual

Page: 11 / 20

OPTICAL SYSTEMS DESIGN
DOC ID: 10110306
OSD8826 OPERATOR MANUAL
PAGE 11
FIGURE 3: DATA CONNECTOR PINOUTS
To connect data cabling for the 8 way cage clamp terminal block, strip the wire between 8mm to 12mm
in length. Insert the cable into the appropriate slot. Using a flat head screw driver, push the orange latch
that is above the cable being inserted and push the cable further in. Release the orange latch. Gently
pull the cable to ensure it is connected and does not come out. If it does come out, the wire is not
stripped enough. Note that if the wire is stripped less than 7mm, there will not be a secure connection.
Shielded cables are recommended for video and data wiring.
FIGURE 4: DATA CABLING CONNECTIONS
Power Connector
8 7 6 5 4 3 2 1
BNC
8 Way Cage Clamp Data Connector
8 Way Cage Clamp Data Connector
Data Cabling
8 –12mm
Push
Insert
8 7 6 5 4 3 2 1
RJ45 Connector
Power Connector