Optical Systems Design OSD8327 Series, Operator'S Manual

Page: 6 / 20

OPTICAL SYSTEMS DESIGN
DOC ID: 10116601
OSD8327 OPERATOR MANUAL
PAGE 6
1.3 TECHNICAL SPECIFICATIONS
TABLE 1: TECHNICAL SPECIFICATIONS
SPECIFICATION PERFORMANCE
Input/Output Impedance 75
Ω
Input/Output Levels 800mVpp nominal
Coax Equalization
350m @ 270Mbps
140m @ 1.485Gbps
70m @ 2.97Gbps
SDI Connectors BNC Female Sockets
Data Rate DC to 1Mbps NRZ
Pulse Distortion and Jitter <±0.3
µ
sec over full dynamic range
Input
User selectable between RS422/RS485 levels, TTL on the + input
with – input floating or RS232 levels
User Controls 8-way user adjustable lever switches
HD/SDI Transmitter Wavelength 1310nm ±30nm (1550nm optionally available)
HD/SDI Transmitter Coupled Power -5 to -0dBm (0dBm and +2dBm are optional)
HD/SDI Receiver Sensitivity <-20dBm for 1x10
-9
Bit Error Rate
Data Link Transmitter Wavelength 1310nm ± 30nm or 1510 to 1590nm
Data Link Transmitter Coupled
Power
-15 to –12dBm
Data Link Receiver Sensitivity <-37dBm for 1 x 10
-9
Bit Error Rate
Standard Optical Link Budget >15dB at 1310nm (>30km of singlemode fiber)
Optical Connector ST standard, FC and SC optional
Power Requirements +10 to 28V
DC
Electrical Connectors
9 pin male subminiture D connector for power on card
2 way terminal block with screw clamps for power on module
8 way terminal block with screw clamps or data
Dimensions (mm)
100W x 208D x 25H card
105 x 114 x 32 modem case
Weight 0.3kg (card), 0.8kg (modem case)
Operating Temperature
-20
°
C to +75
°
C
Relative Humidity 0 to 95% non-condensing
102832702
NOTES:
*Other combinations of laser types and optical levels, receiver types and sensitivity levels are
possible. Contact OSD for details.