Step 5:
Tighten the axle using
the over center clamp arm.
The arm should be in open
position when turning axle
Turn the axle clockwise 5-6
complete turns into the axle
nut.
Step 6:
Close the lever.
The lever must have enough
tension to leave an imprint
on your hand.
Step 7:
The closed lever
position must be between 1-
20 mm in front of the fork
leg.
If the lever does not have
enough tension, or has too
much tension when closed at
the recommended position
(1-20mm in front of the fork),
see the Adjusting 15QR Lever
Position next page.
The over center clamp must be
correctly tightened or the wheel
could fall off.
51
Optibike R8C and R15C Manual
