9
Safety instruction
1. Never put your finger or other something into the
cover to avoid any hurts.
2. Make sure to keep the fan far away from humidity,
chemical articles and oil.
3. While cleaning, be sure to not splash water and
do not use oil, alcohol or chemical articles as they
may cause distortion of fan body and cause elec-
trical hazards.
4. Do not pull out the power supply plug by pulling
power supply cord, which may lead to electrical
shock or generating electrical shock.
5. Keep away from curtain, clothing or other some-
thing may affect the fan’s working.
6. Turn off all switches and pull out power supply
plug when you go out for long time.
7. Never use the fan before finishing assembly to
avoid any hurts.
8. If the supply cord is damaged, it must be repaired
by the manufacture of its service agent or a similarly
qualified in order to avoid a hazard.
9. Before sending for maintaining, if the unit
doesn’t work please check the plug of power sup-
ply has been inserted into socket with electricity.
10. Do not use the electric fan in rain.
11. This appliance is not intended for use by persons
(including children) with reduced physical, senso-
ry or mental capabilities, or lack of experience and
knowledge, unless they have been given supervi-
sion or instruction concerning use of the appli-
ance by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
Structure diagram
1. front cover
2. fastener for cover
3. fastener for fan blade
4. fan blade
5. fastener for back cover
6. back cover
7. motor
8. up-down tube
9. external joint
10. head rotating button
Installing and using
First step: Assemble and connect the base with
assembly up-down tube and support tube. Open the
casing and take out base. Then assemble the tube
and cover of up-down tube and support tube. Aim
the four holes on the bottom of support tube of sup-
port at the holes on the base and tighten the screws.
Slip decorative cover to base alongside the support
tube and adjust up-down tube to height. Then rotate
tighten the external joint.
Second step: Assemble fan blade
1) Assemble guard cover and shroud ring
Tighten back cover enclosure to the motor by fas-
tener. (Pay attention to direction of rotation).
Place joint of shroud ring downwards and cover
the deep groove of shroud ring to the circle side
ring of back cover enclosure. Then tighten the
bolts at the position of joint properly by nut.
2) Install fan blade
While installing fan blade, please wedge groove
on the back of fan blade on spacer pin of the out-
put shaft of motor. Then tighten the fixing nut of
fan blade anticlockwise.
USER’S MANUAL FOR ELECTRIC FAN
WT-2423, WT-2430, WT-2440
UK
WT2423_WT2430_WT2440_IM_120:wentylatory_WT.qxd 2011-01-11 23:39 Page 9 (Black plate)