5
4.
Installation
Then, follow below steps to remove the UPS from the carton and pallet.
Step 1:
Remove carton and foams
Step 2:
Remove fixing plates on the two
sides of the inverter as shown in the chart.
After removing fixing plates, please put
#
screws back to inverter.
Step 3:
Take off front foot of the pallet
Step 4:
Then, lean the pallet to remove
by removing screws as shown in chart.
the inverter from the pallet.
NOTE:
Before installation, please inspect the unit. Be sure that nothing inside the
package is damaged during transportation. Do not turn on the unit and notify the
carrier and dealer immediately if there is any damage or lacking of some parts.
Please keep the original package in a safe place for future use.