Optex VX-402 Instalation Instructions Download Page 1

VX-402, VX-402REC

MULTI STABILIZED OUTDOOR DETECTOR

Standard model  Voice Warning model

No.59-1004- 4  0707-11

2 YEAR WARRANTY

FEATURES

CONTENTS

Voice Warning Function
(VX-402REC Only)

Easy Recording with Built-in
microphone or External apparatus
(VX-402REC Only)

Limited Detection Range Function

Size Judging Function

Bright Light Disturbance Immunity

Detection Area Extension Function

Directional Detection Function

VX-402REC is capable of delivering two kinds of audible messages
to an intruder. This has been proven as an effective means of
deterring BREAK-INS.

The VX-402REC detector records warning messages by either of
two different ways: speak direct to its built-in microphone or connect
an external sound source to the detector.

The detection range of the VX-402 can be limited to avoid detecting
unwanted objects. By limiting  the detection range, false alarms due
to unwanted movement ( i.e. cars, persons or animals outside the
protected area ) can be reduced.

VX-402 is designed to discriminate between large and small
animals. By utilizing this ability, false alarms due to small animals
can be reduced.

VX-402 is equipped with Double Conductive Shielding (Patent
Listed). This shielding greatly reduces the chance of false alarms
due to car headlights, sunlight and other ambient light sources.

The detection area can be easily extended by using its slave units.

VX-402 can distinguish movement direction by using slave units.
This

 

function increases the operational reliability and allows for use

in new applications (Directional Security).

 

1.INSTALLATION HINTS

 2.DESCRIPTION AND OPERATION

 3.INSTALLATION

 4.WIRING

 5.RECORDING

 6.SETTING & ADJUSTMENTS

 7.FUNCTIONS

 8.OPERATION TEST

 9.TROUBLE SHOOTING

10.SPECIFICATIONS

11.DIMENSIONS

2

3

4

5

6

7

10

13

14

16

16

-1-

alarm shop

Summary of Contents for VX-402

















Reviews: